One of the awesome things about DIY means you can dream up wild and crazy projects like this outdoor cabana lounge build.

I’ve always wanted a lazy lounge space in our backyard and with the help of my friend Ana White my dreams have come true.

I first spotted this idea in my buildy friend Liz from Smart Girls DIY Instagram feed:

Clearly this palapa structure is from a vacation destination spot and of course I want my backyard to feel like a vacation! But looking at that frame and considering the support and angles I knew I needed Ana to step in and sketch up plans. Lucky for us she has the free plans available here!

Of course my goal was to complete this project over the summer but time has a way of slipping and now summer has turned to Fall. That’s okay we can still make use of the outdoor cabana lounge and boy is it ever cozy!

I prefer the cabana lounge with the awning cover but it I took some pictures without so you can see the structure. Ana designed the build using lap joints so the beams overlap and intersect then I used hex lag bolts to hold it altogether.

The platform deck boards run 8′ so no waste here and you have a little walking space in front of the queen size camping air mattress.

It’s a little relaxing space carved out of our backyard, if my kids were younger it would make a great playhouse too.

The awning is a super easy addition. I used 80″ wide Sunbrella awning fabric so it fits the length of the cabana without having to finish the edges. On the ends I made a pocket for 3/4″ steel conduit pipe, fold the raw edge of the fabric over 1/2″ and then 2″ and sew a seam then slide the pipe into the pocket:

The pipe acts as a weight to keep the awning in place and is easily removable. Also you can raise the awning sides to let in more air and light by placing the pipe up on the side post:

Personally I prefer the awning sides down to make it more private.

This was my first time building a true deck platform and it won’t be my last. I used the Kreg Deck Jig and you cannot see a single screw head!

Be sure to stop by Ana’s place to get the free plans. Below are some of the steps I took to build this cabana lounge:

Step 1: Making the lap joints sounded way worse than it actually was. I used my handy WORX Compact Circular Saw to make all the cross cuts.

Then went in with my Rockwell Sonicrafter multi-tool to remove all the little slices.

Step 2: To join the laps I predrilled then inserted 3/8-Inch x 3-Inch Hex Lag Screws.

Above is the basic frame assembled.

Add the deck boards using a Kreg Deck Jig. You can see how the Kreg 2-Inch 8 Coarse deck screws are buried at an angle into the sides of each board:

For the large 4×4 cross supports I opted to use Simpson Strong-Tie post caps which wrap around two sides of each 4×4 making the join strong and tight:

Moving on to the headboard use pocket holes and Kreg Blue-Kote 2-1/2″ pocket hole screws. Place a scrap piece of 4×4 to act as your spacer and hold the board in place while you attach.

Up on the roof line use a scrap 2×4 and clamp to give your cross support a resting spot while you attach. I work alone so manuevering and attaching these long supports can be tricky.

To fancy up my outdoor lounge cabana I added clear globe bulb patio string lights. This style of outdoor lights has a small clip on the housing. I hammered in a cord support then slipped the clip through the open space and this allows me to easily remove the lights in the winter.

I hope you enjoyed this build as much as we are enjoying the completed project! A huge thank you to Ana for drawing up the plans and being so patient with me.

Source : Goodshomedesign